Assembly Step 1 - Vision Fitness T80 Owner's Manual

ASSEMBLY STEP 1

BOLT (A)
20 mm
Qty: 6
LEFT CONSOLE MAST
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (C)
BASE FRAME
24
HARDWARE FOR STEP 1:
SPRING WASHER (B)
8.2 mm
Qty: 6
RIGHT CONSOLE MAST
A Open HARDWARE FOR STEP 1.
B Attach LEAD WIRE to CONSOLE CABLE and pull
ARC WASHER (C)
LEAD WIRE through RIGHT CONSOLE MAST. After
8.4 mm
Qty: 6
pulling the LEAD WIRE through the mast, the top of
the CONSOLE CABLE should be located at the top
of the mast. Detach and discard LEAD WIRE.
NOTE: Do not pinch console cable when placing
the mast onto the base frame.
C Attach CONSOLE MAST to BASE FRAME using
3 BOLTS (A), 3 SPRING WASHERS (B) and 3 ARC
WASHERS (C).
LEAD WIRE
NOTE: Do not tighten bolts until step 4 is complete.
CONSOLE CABLE
D Repeat step C on other side.