Hitron CDA-RES User Manual page 38

Table 9: The Cable: Status Screen (continued)
Frequency (MHz)
Modulation
Signal Strength
(dBmV)
Signal Noise Ratio
(dB)
Channel ID
Cable Modem IP Information
IP Address
Subnet Mask
Gateway IP
DHCP Lease Time
38 38 Version 1.1, 03/2014. Copyright
Version 1.1, 03/2014. Copyright
Hitron CDA-RES User's Guide
This displays the actual frequency in Megahertz (MHz)
of each upstream data channel to which the CDA-RES
is connected.
This displays the type of modulation that each upstream
channel uses.
This displays the power of the signal of each upstream
data channel to which the CDA-RES is connected, in
dBmV (decibels above/below 1 millivolt).
This displays the Signal to Noise Ratio (SNR) of each
upstream data channel to which the CDA-RES is
connected, in dB (decibels).
This displays the ID number of each channel on which
the upstream signal is transmitted.
This displays the CDA-RES's WAN IP address. This IP
address is automatically assigned to the CDA-RES.
This displays the CDA-RES's WAN subnet mask.
This displays the IP address of the device to which the
CDA-RES is connected over the CABLE interface.
This displays the time that elapses before your device's IP
address lease expires, and a new IP address is assigned
to it by the DHCP server.
2012 Hitron Technologies
2014 Hitron Technologies
STATUS