Sound; Dsp Parameter; Lipsync - Yamaha RX-V377 Owner's Manual

Sound

Configures the audio output settings.
• Default settings are underlined.
■

DSP Parameter

Configures the surround decoder settings.
Panorama
Enables/disables the broadening effect of the front sound field. When this function
is enabled, you can wrap front right/left channel sounds around the field and
generate a spacious sound field in combination with the surround sound field. This
setting is effective when "bPLII Music" is selected.
Settings
Off Disables the broadening effect of the front sound field.
On Enables the broadening effect of the front sound field.
Center Width
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective
when "bPLII Music" is selected.
Setting range
0 to 3 to 7
Dimension
Adjusts the difference in level between the front and surround sound fields. Higher
to strengthen the front sound field and lower to strengthen the surround sound
field. This setting is effective when "bPLII Music" is selected.
Setting range
-3 to 0 to +3
Center Image
Adjusts the center orientation level (broadening effect) of the front sound field.
Higher to strengthen the center orientation level (less broadening effect) and lower
to weaken (more broadening effect). This setting is effective when "Neo:6 Music" is
selected.
Setting range
0.0 to 0.3 to 1.0
■

Lipsync

Adjusts the delay between video and audio output.
• You can enable/disable the Lipsync function by input sources in "Lipsync" (p.50) in the "Option" menu.
Select
Selects the method to adjust the delay between video and audio output.
Setting range
Select this option when you want to adjust the delay between video
Manual and audio output manually.
Adjust the audio output timing in "Adjustment".
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
Auto
If necessary, you can fine-adjust the audio output timing in
"Adjustment".
• "Select" is automatically set to "Manual" depending on the TV connected to the unit.
Adjustment
Adjusts the delay between video and audio output manually when "Select" is set to
"Manual". You can fine-adjust the audio output timing when "Select" is set to
"Auto".
Setting range
0 ms to 500 ms (1 ms increments)
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
59
En