Seize The Line First, Then Dial - Siemens HiPath 3000 Operating Manual

Step by Step
Feature not availab-
le.
Please replace hand-
set.
Charging the battery pack
You may only use the charging shell provided for the
handset.
The handset charges when sitting in the charging shell,
even when deactivated. If the handset is active, the
charging status display flashes on the display.
If the handset deactivates because the battery pack is
flat, it automatically reactivates and is ready for opera-
tion as soon as you place it in the charging shell. The
charging operation starts. If a PIN was set, it must be
entered first to allow charging to start.
Language
If your preferred language for the display texts is not
set, you can set this yourself (

Seize the line first, then dial

or When the handset is idle: Press and hold down the Talk
key or press the Speakerphone key.
o
Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error: Press the On-hook key.
either:
p
The user answers. Conduct the call.
or:
The user is busy or rejects the call.
Press the On-hook key briefly.
Conducting calls – the basic functions
Page 23).
3