Activating/Deactivating The Handset; First Seize The Line, Then Dial - Siemens HiPath 500 V2.0 Operating Manual

Table of Contents

Advertisement

Conducting calls – the basic functions
Step-by-Step
c
2
All manuals and user guides at all-guides.com

Activating/deactivating the handset

a
Press the On-hook key until the activation or deactiva-
tion is confirmed by a crescendo tone sequence.
Note:
• The handset can only be fully switched off
• When the handset is placed in the charging
If your preferred language for the display texts is not
set, you can set this yourself (
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in on or message status:
|
No receive field strength
Ò
Low receive field strength
Ñ
50% receive field strength
Ð
100% receive field strength
The radio range is different indoors and outdoors
(
page 93). Please consult your system administrator
in the event of range problems.

First seize the line, then dial

u
or
Press the Talk or Speakerphone key.
o
Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error: press the On-hook key.
p
The user answers. Conduct the call.
when removed from the charging shell.
shell it goes to idle status and shows the idle
display.
page 16).

Advertisement

Table of Contents
loading

Table of Contents