Siemens HiPath 3000 Operating Manual page 20

Conducting calls – the basic functions
Step by Step
> <
2=external calls
only?
> <
3=internal calls only?
> <
Divert cancelled?
10
[
Select the menu item and confirm.
or:
[
Select the menu item and confirm.
then:
o
Enter the destination phone number.
Save Save the settings.
Press the On-hook key to end the operation.
Note:
The external code must be entered before ex-
ternal phone numbers. If the service engineer
has activated DTMF DID, you can also forward
calls to these external phone numbers.
Deactivating call forwarding
Prerequisite:
The room monitor function is activated.
or Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
Press the On-hook key briefly to end the operation.