Spirit XT275 Owner's Manual page 12

WINDOW DISPLAYS:
DISTANCE:
TIME:
CALORIES:
SPEED:
PULSE:
INCLINE:
PRGM/LAPS:
LUBE:
BUTTON FUNCTIONS:
START: Press the "START" button to begin a program.
STOP: Press the "STOP" button to stop training and press for 3 seconds to reset.
FAST: Press the "FAST' button to increase your speed.
SLOW: Press the "SLOW" button to decrease your speed.
UP: Press the "UP" button to increase elevation position.
DOWN: Press the "DOWN" button to decrease elevation position.
ENTER: Press the "ENTER" button to select different parameters during programming
SELECT: Press the "SELECT" button to choose type of profile displayed, either speed or
incline.
PROGRAM: Press the program buttons to choose your training mode.
FAN: There are two speed levels for the fan. Pressing the FAN button once will turn
on the fan at medium wind velocity; the second press will be high wind velocity.
Pressing the button a third time will turn the fan off.
SAFETY KEY: Put safety key in position to enable the computer. When the safety key is pulled
away from its position, the computer will automatically shut down the motor.
RAPID SPEED KEYS:
5 preset buttons for rapid speed: 2Mph, 4Mph, 6Mph, 8Mph, 10Mph. You can press the 5 buttons,
mentioned above, at any time during a program and the treadmill will automatically adjust to the
preset speed.
Accumulates total workout distance from 0.00 to 99.99 miles (km).
Accumulates total workout time from 00:00 to 99:59.
Accumulates the user's calorie consumption during exercise.
Max. Value is 999.9 calories.
Displays the current running speed from 0.5 mph – 10 mph.
Displays your current heart rate in beats per minute during workout.
Displays your current workout elevation from 0 to 10.
Initially shows the program number during the program selection process.
During the workout the display switches to show accumulated 1/4 mile Laps
from L00 to L99.
Reminds user to apply silicon lubricant between the belt and deck. If "ODO"
or "HRS" reach their target, where "HRS" is 180 hours or "ODO" is 600 mi.,
the display window will light an indicator next to the "Lube" icon on the
console overlay. To turn off the Lube message, press and hold the stop
button for 3 seconds.
11
XT175 / XT275