Running Ptz Functions - Q-See QC SERIES User Manual

Preset
STEP 1. Start by using the eight direction arrows on the PTZ Control Panel (Picture 6-5)
to position the camera where you want.
STEP 2. Click the Preset button in the Function list and enter the number you want to
assign to this preset.
This preset can now be added to a tour.
Patrol
STEP 1. Click the Patrol button in the
Function list and enter the number of
the preset you wish to add to it.
STEP 2. Click Add Preset to enter it
into the tour. You can have up to 80
presets in a single patrol.
STEP 3. Assign the patrol a number
Pattern
STEP 1. Click the Pattern button in the
Function list.
STEP 2. Click the Begin button
STEP 3. Modify the zoom focus and
iris settings using the PTZ Control
Panel (Picture 5-5)
STEP 4. Click the End button to save the
changes
STEP 5. Enter the desired number for
this pattern into the field.
Border (Auto Scan)
STEP 1. Click the Border button in the
Function list
STEP 2. Select either the Left or Right
button to indicate which edge you are
defining
STEP 3. Use the direction arrows in the
PTZ Control Panel (Picture 5-5) to
move the camera to the limit desired.
STEP 4. Repeat for the other border.
In the PTZ Control Panel (Picture 5-5), clicking the PTZ Trace button will begin the auto
scan. The button will convert to a Stop button which can be used to end the scan.
70
PICTURE 5-8
PICTURE 5-9
PICTURE 5-10

RUNNING PTZ FUNCTIONS

Clicking on the Page Switch button in the PTZ Control Panel
new window (Picture 5-11) which allows you to activate the functions created above as well
as the Auto Pan and Flip functions.
Enter the number of the function you wish to
activate and select the function button to run
that function.
In addition, there are other functions that can
be engaged in this window.
AutoPan - This will cause the camera to
automatically rotate.
Flip - Most PTZ cameras have a mechanical
stop which will prevent the camera
from rotating a full 360°. If the camera
is tracking someone or some thing
and it reaches this stop, pressing Flip
will bring the camera around the other
direction to continue tracking. Some
PTZ cameras have "E-flip" which will
do this automatically.
Page Switch - returns you to the PTZ
Control Panel (Picture
5-5)
Reset - This ends the currently running
function.
(Picture 5-5) will switch to a
PICTURE 5-11
71