Loading A Style File - Yamaha PSR-E443 Quick Manual

1
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
2
Use the CATEGORY [+] and [-] buttons to
call up "Load USR."
3
Press the [0/EXECUTE] button.
"USER***" (***: number) appears on the display
as the User file name in the USB flash memory.
As desired, rotate the dial to select a different User
file.
Note that the User file should be saved in the
USERFILES folder on the USB flash memory.
Files saved outside this folder cannot be recog-
nized.
4
Press the [0/EXECUTE] button again.
A confirmation message will appear. To cancel the
operation, press the [-/NO] button.
5
Press the [0/EXECUTE] button again, or
the [+/YES] button to execute the Load
operation.
After a while, a message indicating completion of
the operation appears.
NOTICE
• The Load operation cannot be cancelled during exe-
cution. Never turn off the power or disconnect the
USB flash memory during the operation. Doing so
may result in data loss.
6
Press the [FUNCTION] button to exit
from the File Control display.
7
Check the loaded data by calling up the
User Song, one of the Styles 201–205,
and Registration Memory settings.
Load USR
USER001
USB Flash Memory Operations

Loading a Style File

Style data created on another instrument or a com-
puter can be loaded to the Style numbers 201–205,
and you can play them like the internal preset Styles.
The following two Load operations are available.
 Loading of a Style file (.sty) saved on the root
directory on the USB flash memory
 Loading of a Style file (.sty) transferred from a
computer via the Musicsoft Downloader and stored
in the internal memory of this instrument
NOTE
• For instructions on transferring a Style file from a computer via
the Musicsoft Downloader, refer to "Computer-related Opera-
tions" (page 9). After data transfer, load the Style data to one
of the Style numbers 201–205 to enable playback.
NOTICE
• Loading a Style file will overwrite and erase the existing
data of the destination number. Save important data you
want to keep to a separate USB flash memory before load-
ing.
1
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
2
Use the CATEGORY [+] and [-] buttons to
call up "Load STY."
3
Press the [0/EXECUTE] button.
A name of a Style file in the USB flash memory or
internal memory of this instrument will appear on
the display. As desired, rotate the dial to select a
different Style file.
4
Press the [0/EXECUTE] button again.
As the Load destination, "Load To? ***" (***:
201–205) appears on the display. If desired, rotate
the dial to select a different number.
Load STY
DiscoFox
FLA
Load To?
201
PSR-E443 Owner's Manual
61