Modulation/Sfx - Zoom G1on User Manual

MODULATION / SFX
Tremolo This effect varies the volume at a regular rate.
Depth
Page01
Adjust the depth of the modulation.
Wave
Page02
Sets the modulation waveform.
Slicer This effect creates a rhythmical sound by continuously slicing the input.
PTTRN
Page01
Sets effect pattern.
THRSH
Page02
Adjusts effect threshold.
Phaser This effect adds a phasing variation to the sound.
Rate
Page01
Sets the speed of the modulation.
Page02
Vibrato This effect automatically adds vibrato.
Depth
Page01
Sets the depth of the modulation.
Tone
Page02
Adjusts the tone.
This vibe sound features unique undulations.
TheVibe
Speed
Page01
Sets modulation speed.
Wave
Page02
Adjusts modulation waveform.
By mixing an effect sound that is slightly pitch-shifted with the original sound, this effect
Detune
type has a chorus effect without much sense of modulation.
Cent
Page01
Adjusts the detuning in cents, which
are fine increments of 1/100-semitone.
Tone
Page02
Adjusts the tone.
StereoCho This is a stereo chorus with a clear tone.
Depth
Page01
Sets the depth of the modulation.
Tone
Page02
Adjusts the tone.
Parameter1
0–100 P Rate
Adjusts the rate of the modulation.
UP 0–UP 9,
DWN 0–DWN 9, P
TRI 0–TRI 9
Parameter1
1–20 Speed
Sets modulation speed.
0–50 Level
Adjusts the output level.
Parameter1
1–50 Color
P
Sets the tone of the effect type.
Parameter1
0–100 Rate
Sets the speed of the modulation.
0–10 Level
Adjusts the output level.
Parameter1
0–50 P Depth
Sets the depth of the modulation.
0–100 P Mode
Sets effect to vibrato or chorus.
Parameter1
-25–25 PreD
Sets the pre-delay time of the effect
sound.
0–10 Level
Adjusts the output level.
Parameter1
0–100 P Rate
Sets the speed of the modulation.
0–10 Level
Adjusts the output level.
11 11
Parameter2
0–50 P Level
Adjusts the output level.
Parameter2
1–50 P Bal
Adjusts the balance between original
and effect sounds.
0–150 P
Parameter2
4 STG, 8 STG,
Level
inv 4, inv 8
Adjusts the output level.
Parameter2
0–50 P Bal
Adjusts the balance between original
and effect sounds.
0–150 P
Parameter2
0–100 P Bias
Adjusts bias of waveform modulation.
VIBRT, CHORS Level
Adjusts the output level.
Parameter2
0–50 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 P
Parameter2
1–50 P Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150
P
Parameter3
0–150 P
Parameter3
0–100 P
Parameter3
0–150
P
Parameter3
0–100 P
Parameter3
0–100 P
0–150 P
Parameter3
0–100 P
Parameter3
0–100 P