HP ProLiant DL320e Quickspecs page 8

QuickSpecs
Standard Features
Graphics
Form Factor
One of the following
depending on Model
On System Management
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
1U Rack form factor
8 SFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.46cm) Width x 27.5" (69.90cm) Length
4 LFF Drive Bay Version:
1.7" (4.32cm) Height x 17.11" (43.46cm) Width x 29.5" (75.00cm) Length
HP iLO Management
Engine
DA - 14326 North America — Version 5 — November 17, 2012
HP ProLiant DL320e Generation 8 (Gen8)
HP iLO Management Engine is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO management processor is the core foundation for HP
iLO Management Engine. HP iLO for HP ProLiant servers simplify server
setup, engage health monitoring and power and thermal control, and
promote remote administration for HP ProLiant ML, DL, BL and SL
servers. Furthermore with the new HP iLO is the ability to access,
deploy, and manage your server anytime from anywhere with your
Smartphone device.
HP Agentless Management: With HP iLO Management Engine in every
HP ProLiant Gen8 server, the base hardware monitoring and alerting
capability is built into the system (running on the HP iLO chipset) and
starts working the moment that a power cord and an Ethernet cable is
connected to the server.
HP Active Health System: HP Active Health System is an essential
component of the HP iLO Management Engine. The HP Active Health
System monitors and records changes in the server hardware and
system configuration. The Active Health System assists in diagnosing
problems and delivering rapid resolution when system failures occur.
HP Intelligent Provisioning: HP Intelligent Provisioning includes
everything you need for painless system setup and deployment. All
your HP Gen8 ProLiant servers and Gen8 ProLiant server blades are
ready to set-up right out-of-the box. The firmware, drivers, and tools
that you need to quickly get your systems online are embedded on a
NAND flash chip on the server motherboard- no more SmartStart CDs or
firmware DVDs needed. Intelligent Provisioning is agentless for
improved performance, but you still have the ability to run agents if
needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning
information and to view usage videos.
for additional
Page 8