HP ProLiant DL320e Quickspecs page 3

QuickSpecs
Standard Features
Upgradeability
On System Management
Processor
Memory Protection
Memory
One of the following
depending on Model
Network Controller
Up to 4 DIMM slots available for higher Memory capacity
Up to 8 SFF Hard Drive Bays; Or 4 LFF Hot plug or Non hot plug Drive Bay
1 PCIe 2.0 expansion slot
1 PCIe 3.0 I/O slot for additional communications and storage expansion (depends on processor)
Redundant Power Supply
Optical Drive Bay
HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo.
ECC
Type
DIMM Slots Available
Standard (Entry Model)
Standard (Base Models)
Standard ( Performance
Models)
Maximum Capacity
(UDIMM)
NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant DL320e
Gen8 Server.
NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is
required. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online Memory
Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
HP Ethernet 1Gb 2-port 330i Adapter
NOTE: The HP ProLiant DL320e Gen8 server has an embedded dual-port network adapter . The server can
be further upgraded with various networking products
DA - 14326 North America — Version 5 — November 17, 2012
HP ProLiant DL320e Generation 8 (Gen8)
HP SmartMemory
Unbuffered (UDIMM)
4 DIMMs (2 Channels/ 2 DIMMs per channel)
2GB (1 x 2GB) UDIMM PC3-12800E (1600MHz)
4GB (1 x 4GB) UDIMM PC3-12800E (1600MHz)
8GB (2 x 4GB) UDIMM PC3-12800E (1600MHz)
32GB (4 x 8GB@1600MHz)
Page 3