Turning The Fortigate Unit Power On And Off - Fortinet FortiGate 60 Installation Manual

Getting started

Turning the FortiGate unit power on and off

FortiGate-60 Installation Guide
Power requirements
• DC input voltage: 12 V
• DC input current: 3 A
Environmental specifications
• Operating temperature: 32 to 104°F (0 to 40°C)
• Storage temperature: -13 to 158°F (-25 to 70°C)
• Humidity: 5 to 95% non-condensing
To power on the FortiGate unit
1 Connect the AC adapter to the power connection at the back of the FortiGate-60 unit.
2 Connect the AC adapter to the power cable.
3 Connect the power cable to a power outlet.
The FortiGate-60 unit starts. The Power and Status LEDs are on.
Table 1: FortiGate-60M LED indicators
LED
Power
Status
Link
(Internal
DMZ
WAN1
WAN2)
100
(Internal
DMZ
WAN1
WAN2)
To power off the FortiGate unit
Always shut down the FortiGate operating system properly before turning off the
power switch.
1 From the web-based manager, go to System > Maintenance > ShutDown, select
Shut Down and select Apply, or from the CLI, enter:
execute shutdown
2 Disconnect the power supply.
State Description
Green The FortiGate unit is powered on.
Off The FortiGate unit is powered off.
Green The FortiGate unit is starting up.
Off The FortiGate unit is running normally.
Green The correct cable is in use and the connected
equipment has power.
Flashing Green Network activity at this interface.
Off No link established.
Green The interface is connected at 100 Mbps.
01-28008-0018-20050128
Turning the FortiGate unit power on and off
15