Aligning Cartridges; Using The Self Test Page - HP C5370A User Manual

To clean the glass:
1
Turn off the HP Color Copier, remove the power cord, and then
raise the document cover.
2
Clean the glass with a soft cloth or sponge slightly moistened with
warm water and a mild soap or detergent. You may also use glass
cleaner.
CAUTION Do not use abrasives, acetone, benzene, or carbon tetrachloride on the
glass; these can damage the glass.
Do not place liquids directly on the glass. They may seep under it and
damage your copier.
3
Rinse the soft cloth or sponge with clean water, wring out excess
water, and wipe the remaining soap or detergent off the glass.
4
Dry the glass with a chamois or cellulose sponge to prevent
spotting. If soap or detergent does not clean the glass sufficiently,
you can use isopropyl alcohol as a cleaning agent.

Aligning Cartridges

Use the Align Cartridges feature whenever you install new print
cartridges. See "Step 8 — Align Your Black and Color Print
Cartridges" on page 2-10 for step-by-step instructions.

Using the Self Test Page

Use the Self Test Page to check the print cartridges and to determine
whether the automatic document feeder is successfully installed.
To Print a Self Test Page:
1
Press the Menu button repeatedly until you see "Self Test" on the
front panel display.
2
Press Select/Resume .
The message "Printing" appears on the front panel display, and a
Self Test Page will be printed. See "How to Clear a Paper Jam in
the Automatic Document Feeder" on page 5-2 for more
information.
7-2 Maintaining Your HP Color Copier