HP Officejet 100/150
Install the HP 1200w NFC/Wireless Mobile Print Accessory
For more information about the wireless mobile print accessory, visit www.hp.com/go/1200wSupport.
To connect the wireless mobile print accessory while using power from the printer
1. Make sure the printer you are connecting is turned on.
2. Using the USB cable provided, connect the wireless mobile print accessory and the printer.
a. Connect one end (type A flat plug) of the USB cable to the USB host port of the wireless accessory.
b. Connect the other end (type B rounded plug) of the USB cable to the USB port of the printer.
3. Using an additional USB cable (not provided), power the wireless mobile print accessory using power from the printer.
You would need an additional USB cable (not provided with the wireless accessory).
a. Connect one end (type B rounded plug) of the second USB cable to the USB device port of the wireless accessory.
b. Connect the other end (type A flat plug) of the second USB cable to the USB host port of the printer.
Scan to find out more
Standard data rates may apply. Might not be available in all languages.
HP Officejet 100/150
www.hp.com/go/OJ100_150
HP 1200w NFC/Wireless Mobile Print Accessory
www.hp.com/go/1200wSupport
The information contained herein is subject
to change without notice.
© 2013 Hewlett-Packard Development Company, L.P.
EN