Front Panel Messages - HP C5370A User Manual

Color copier
Table of Contents

Advertisement

Front Panel Messages

Message
Power Save On
Door Open. Close cartridge
door.
Paper Jam. Press and hold
Resume to eject paper.
ADF Paper Jam.
Busy. Can't start another
copy job.
Out of Paper. Replace paper
then press Resume.
Remove original from the
document glass.
Remove and check (black or
color) cartridge
No Cartridge. Insert (black
or color) cartridge.
Remove and check black
cartridge. Verify Part
Number: 51645A
5-4
Troubleshooting
What You Should Do
The front panel displays this message when the OfficeJet Pro
has not been used for 12 hours or more. Press any button on
the front panel or load originals in the automatic document
feeder.
Close the print cartridge door.
To clear the paper jam, press and hold the Select/Resume
button. The paper should eject. If this does not work, refer to
the procedures on page 5-1.
If only one or two sheets of paper are in the paper tray, the
copier might not pick up the paper properly, causing a jam in
the copier.
Remove the papers that are jammed, and add more paper to
the paper tray.
Refer to "How to Clear a Paper Jam in the Automatic
Document Feeder" on page 5-2.
You will see this message when you try to start a new copy
job before the first job is complete, or you try to change front
panel settings while a copy job is in progress.
Wait until the first copy job is complete before trying to start
another.
If the paper tray is empty, load paper in the paper tray, and
press Select/Resume.
If the paper is not inserted correctly, adjust the paper, then
press Select/Resume.
Remove the original from the copier glass, then press the
Select/Resume on the front panel to continue.
One of the print cartridges is either incorrectly installed, the
wrong type, or defective.
Remove the print cartridge (black or tri-color), and then
replace it in the carriage stall.
Make sure to remove the tape from the print cartridge, and
close the latch securely.
A print cartridge is missing. Insert the missing cartridge.
The wrong black cartridge is installed. Remove it, and
replace it with the correct cartridge, part number 51645A.

Advertisement

Table of Contents
loading

This manual is also suitable for:

145155Color copier 140/150Prosignia 150140

Table of Contents