Auto Trapping; Booklet Maker: Booklets - Oki C9850hdn Advanced User's Manual

A
UTO TRAPPING
Trapping is a technique which prints some object slightly larger or smaller than specified in
an application, in order to prevent white edges around the objects. These white edges, or
"halos", can be caused by factors such as misregistration, the physical properties of the
toner and the stiffness of the media. The Auto Trapping feature provides you with advanced
trapping settings and gives you full control over their values.
For more information, see Color Printing manual.
B :
OOKLET MAKER BOOKLETS
Use this option to arrange the pages of your print job in special layouts for folding or cutting
after printing. Custom Paper Sizes are not supported when creating a booklet.
To assign a fixed center margin for your booklet job, you can use the Center Margin option.
For information, see
To assign a center margin relative to X- and Y-axis, you can use the Centering Adjustment
option. For information, see
To adjust for the incremental shifting that may occur when you print booklet jobs, you can
use the Creep Adjustment option. For more information, see
page 69.
The following booklet methods are supported:
Off: The job is printed without any booklet imposition features.
Standard: Choose this setting to print entire documents that are folded and stacked in
booklet order. Finished pages can be stapled or stitched across the center fold, or spine.
Front
Right Binding: This option is the same as the Standard booklet, except that the page
order sequence is from right to left.
Perfect: Choose this setting to print separate folded pages that are stacked in booklet
order. Finished pages are stitched adjacent to one another for trimming or gluing.
Front
"Center margin" on page
"Centering Adjustment" on page
Back
Back
Print options – PostScript > 66
68.
68.
"Creep Adjustment" on