Table of Contents
Advertisement
3.5.
Power Management Setup
ø This is used to control the various power saving features of the PC.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
ACPI Suspend Type
Power LED in S1 State
Soft-Off by PWR-BTTN
AC Back Function
PME Event Wake Up
ModemRingOn
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
higf: Move
Enter: Select
F5: Previous Values
n n n n n ACPI Suspend Type
Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/
POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)
n n n n n Power LED in S1 state
Allows user to select the system LED status in the S1 (POS - Power On Suspend) state.
Options:
Blinking (LED will blink)
Dual/OFF (When selecting this, the LED will turn off for a single-colored LED
or change color for a dual-colored LED)(default:Blinking)
n n n n n Soft-off by PWR-BTTN
Controls whether the PC shuts off immediately after hitting the power button or delaying
a few seconds. (default:Instant-off)
Options:
Instant-off (PC shuts off immediately)
Delay 4 Sec. (PC shuts off after a 4sec. delay)
n n n n n AC Back Function
Allows user to select system status when power is removed and returned.
Options:
Memory (return prior to power removal)
Full-On (return to full system power)
Soft-Off (use of Soft PWR button to power on system)(default:Soft-Off)
n n n n n PME Event Wake Up
Allows user to select the Power Management Event (PME) wake up function which
requires the system to have a +5VSB power supply using a rate of 1A or less.
(default:Enabled)
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-Off]
[Soft-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value
F10: Save
F6: Fail-Save Default
Item Help
Menu Level}
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
ESC: Exit
F1: General Help
F7: Optimized Defaults
20
Advertisement
Table of Contents
