Wash Programmes - Hotpoint Ultima WMA74 Installation And User Instructions Manual

To select a programme to suit your individual requirements use the following series of
tables, explaining the wash programme buttons and programme details.
The programmes have been listed by Fabric Type.
The programme times 'Time to End' . ..
For each wash programme and option(s) selected the machine automatically
calculates the estimated programme length 'Time to End' . This is displayed in hours
and minutes shortly after the wash programme temperature has been displayed.
The 'Time to End' will then remain lit throughout the wash programme and counts
down to the end of the programme.
Note: These estimated programme times are dependant on the temperature and
pressure of the incoming water supply, the option(s) selected and the load being
washed. They may, therefore change during the fill stages of each programme to take
into account the extra heating or filling time required.
To review the current wash programme during the wash cycle...
This feature allows you to check the running wash programme.
Press the 'Start' button once. The wash programme temperature will be illuminated in
the display window followed by the spin speed.
After a few seconds the display window will return to the 'Time to End' showing the
remaining programme length.
If you decide the selected programme does not suit your requirements you can
change the programme, see previous page 'To change a programme' .
Fabric type - Cotton
Wash Press
Label Button
Once
Twice
Three
times
16

Wash programmes

Display
Window
Fabric
shows
Non-colourfast cotton,
linen or viscose
Colourfast cotton
linen or viscose without
special finishes
White cotton and linen
without special finishes
Wash
Maximum
Temp
Spin speed
dry weight
˚C
load
WMA76 - 1600
6kg
40 WMM75 - 1600
WMA74 - 1400
WMA76 - 1600
60 6kg
WMM75 - 1600
WMA74 - 1400
WMA76 - 1600
WMM75 - 1600
95
6kg
WMA74 - 1400
(rpm)