Table of Contents
Advertisement
Instructions for use
GB
English,1
WMAO 743
WASHING MACHINE
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Cutting off the water or electricity supply
Troubleshooting, 13-14
tion, 15
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint WMAO 743
Summary of Contents for Hotpoint WMAO 743
-
Page 1: Table Of Contents
Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and tips, 7 General safety Disposal WMAO 743 Description of the washing machine, 8-9 Control panel Display Running a wash cycle, 10 Wash cycles and functions, 11... -
Page 2: Unpacking And Levelling
Installation ! Keep this instruction manual in a safe place 2. If the floor is not perfectly level, compensate for future reference. Should the appliance be for any unevenness by tightening or loosening the adjustable front feet (see figure); the an- sold, transferred or moved, make sure the gle of inclination, measured according to the instruction manual accompanies the washing... - Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without bending • the socket is compatible with the washing it, to a draining duct machine’s plug.
-
Page 4: The First Wash Cycle
13 amp fuse, either in the plug or adaptor or Technical data at the distribution board. If you are in any doubt regarding the electrical WMAO 743 Model supply to your machine, consult a qualified electrician before use. width 59.5 cm... -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and electri- 2. unscrew the lid city supplies by rotating it anti- clockwise (see figu- • Turn off the water tap after every wash cycle. re): a little water may This will limit wear on the hydraulic system in- trickle out. -
Page 7: Precautions And Tips
Precautions and tips This washing machine was designed and constructed in accordance with international safety regulations. The fol- lowing information is provided for safety reasons and must therefore be read carefully. General safety • This appliance was designed for domestic use only. This appliance can be used by children aged •... -
Page 8: Description Of The Washing Machine
Description of the washing machine Control panel CHILD LOCK SPIN SPEED ON/OFF button button button DISPLAY START/PAUSE MEMORY button with FUNCTION Detergent dispenser drawer button indicator light WASH buttons CYCLE SELECTOR DELAY TEMPERATURE buttons START button button Detergent dispenser drawer: used to dispense deter- This means it is possible to prevent wash cycles from gents and washing additives (see “Detergents and laundry”). - Page 9 Display The display is useful when programming the machine and provides a great deal of information. The two upper strings A and B provide details of the wash cycle selected, the wash cycle phase in progress and all informa- tion relating to the progress status of the wash cycle. String C shows the time remaining until the end of the wash cycle in progress and, if a DELAY START has been set, the time remaining until the start of the selected wash cycle.
-
Page 10: Running A Wash Cycle
Running a wash cycle 1. SWITCH THE MACHINE ON. Press the On/Off button The functions may affect the recommended load value ; the text HELLO will appear on the display and the START/ and/or the duration of the cycle. PAUSE indicator light will flash slowly in a green colour. 7. -
Page 11: Wash Cycles And Functions
Wash cycles and functions Table of wash cycles Detergents Max. Max. Description of the wash cycle temp. speed (°C) (rpm) 40° Cotton (Cottons) : lightly soiled whites and delicate colours. 1400 (1st press of the button) (Max. 90°) Cotton (Cottons) : lightly soiled whites and delicate colours. -
Page 12: Detergents And Laundry
Detergents and laundry Detergent dispenser drawer Special wash cycles Good washing results also depend on the correct dose of Cotton 20°: ideal for lightly soiled cotton loads. The effec- detergent: adding too much detergent will not necessarily tive performance levels achieved at cold temperatures, result in a more efficient wash, and may in fact cause a which are comparable to washing at 40°, are guaranteed build up on the inside of your appliance and contribute to... -
Page 13: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •... - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Product Guarantee And Repair Information
Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Hotpoint reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage. - Page 16 195133190.00 03/2015 - Xerox Fabriano Indesit Company Spa Viale Aristide Merloni, 47 60044 Fabriano (AN) Italy www.hotpoint.co.uk...