Table of Contents
Advertisement
Instructions for use
GB
English,1
WMEF 963
EXPERIENCE
Contents
Installation, 2-3-4-5
Connecting the electricity and water supplies
Troubleshooting, 13-14
Assistance, 15-16
WASHING MACHINE
GB
1
Advertisement
Table of Contents
Related Manuals for Hotpoint WMEF 963
Summary of Contents for Hotpoint WMEF 963
-
Page 1: Table Of Contents
General safety Disposal Opening the porthole door manually Description of the washing machine, 8-9 Control panel Display WMEF 963 Running a wash cycle, 10 Wash cycles and options, 11 Table of programmes and wash cycles Wash options Detergents and laundry, 12... -
Page 2: Installation
Installation ! Keep this instruction manual in a safe place 2. If the floor is not perfectly level, compensate for future reference. Should the appliance be for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle sold, transferred or moved, make sure the of inclination, measured according to the instruction manual accompanies the washing... -
Page 3: Connecting The Drain Hose
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without bending • the socket is compatible with the washing it, to a draining machine’s plug. -
Page 4: The First Wash Cycle
If you are in any doubt regarding the electrical Technical data supply to your machine, consult a qualified electrician before use. Model WMEF 963 How to connect an alternative plug: width 59.5 cm The wires in this mains lead are coloured in Dimensions... -
Page 6: Care And Maintenance
Care and maintenance Cutting off the water and Caring for the door and drum of electricity supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system to prevent unpleasant odours from forming. -
Page 7: Precautions And Tips
Precautions and tips Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The In the event that it is not possible to open the porthole following information is provided for safety reasons and door due to a powercut, and if you wish to remove the must therefore be read carefully. -
Page 8: Description Of The Washing Machine
Description of the washing machine Control panel TEMPERATURE CHILD CLEANING button LOCK ACTION button button ON/OFF button DISPLAY START/PAUSE OPTION button and indicator SPIN button and WASH light Detergent dispenser drawer button indicator light CYCLE SELECTOR KNOB DELAY TIMER button Detergent dispenser drawer: used to dispense DELAY TIMER button: press to set a delayed start for... -
Page 9: Display
Display The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear; if the DELAY TIMER option has been set, the countdown to the start of the selected wash cycle will appear. Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle. -
Page 10: Running A Wash Cycle
Running a wash cycle For lightly-soiled garments or a more delicate treatment 1. SWITCH THE MACHINE ON. Press the button; of the fabrics, press button until the “Delicate” the START/PAUSE indicator light will flash slowly in a level is reached. The cycle will reduce drum rotation green colour. -
Page 11: Wash Cycles And Options
Wash cycles and options Table of programmes and wash cycles Detergents Max. Max. spe- Description of the wash cycle temp. (°C) (rpm) CLEAN Plus Anti Stain 40° 1600 180’ 60° 1600 180’ Whites 60° 1600 1.19 57.5 205’ Cotton Standard 60°C (1): heavily soiled whites and resistant colours. -
Page 12: Detergents And Laundry
Wool: the “Wool” wash cycle on this Hotpoint machine has been tested and approved by The Woolmark Company for washing wool garments labelled as hand washable... -
Page 13: Troubleshooting
Troubleshooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •... - Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
-
Page 15: Assistance
OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 16: After Sales Service
Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk...