Hotpoint AQUARIUS WMAQC 741 Instructions For Use Manual
Hotpoint AQUARIUS WMAQC 741 Instructions For Use Manual

Hotpoint AQUARIUS WMAQC 741 Instructions For Use Manual

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint AQUARIUS WMAQC 741

  • Page 1: Table Of Contents

    Instructions for use WASHING MACHINE Contents Installation, 2-3-4-5 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle English,1 Technical data Care and maintenance, 6 Cutting off the water or electricity supply Cleaning the washing machine Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose...
  • Page 2: Installation

    Installation 2. If the floor is not perfectly level, compensate ! Keep this instruction manual in a safe place for any unevenness by tightening or loosening for future reference. Should the appliance be sold, transferred or moved, make sure the the adjustable front feet (see figure);...
  • Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without ben- • the socket is compatible with the washing ding it, to a draining machine’s plug.
  • Page 4: The First Wash Cycle

    As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
  • Page 6: Care And Maintenance

    Care and maintenance Cutting off the water and electri- Caring for the door and drum of city supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system in- to prevent unpleasant odours from forming.
  • Page 7: Precautions And Tips

    Precautions and tips ronment. The crossed out “wheeled bin” symbol on the This washing machine was designed and constructed in product reminds you of your obligation, that when you accordance with international safety regulations. The fol- dispose of the appliance it must be separately collected. lowing information is provided for safety reasons and must Consumers should contact their local authority or retailer therefore be read carefully.
  • Page 8: Description Of The Washing Machine And Starting A Wash Cycle

    Description of the washing machine and starting a wash cycle Control panel WASH CYCLE PROGRESS indicator lights DOOR ON/OFF button LOCKED TEMPERATURE indicator light knob START/PAUSE button with indicator light FUNCTION Detergent dispenser drawer buttons with indicator lights WASH CYCLE knob Detergent dispenser drawer: used to dispense START/PAUSE button with indicator light: starts or tem-...
  • Page 9: Indicator Lights

    Indicator lights Door locked indicator light If this indicator light is on, the appliance door is locked to The indicator lights provide important information. prevent it from being opened accidentally; to avoid any This is what they can tell you: damage, wait for the indicator light to switch off before you open the appliance door.
  • Page 10: Wash Cycles

    Wash cycles Table of wash cycles Detergents Max. Max. spe- Description of the wash cycle temp. (°C) (rpm) CLEAN Plus Anti Stain 40° 1400   180’ 60° 1400 180’ Whites   60° (1): 1400 1.13 52.5 180’ Cotton Standard 60°C heavily soiled whites and resistant colours.
  • Page 11: Personalisation

    Personalisation Setting the temperature Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash ( ). The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle.
  • Page 12: Detergents And Laundry

    Detergents and laundry Detergent dispenser drawer Anti Allergy 40°C: (cycle 7) cycle studied for cotton laun- dry and other resistant fabrics to guarantee the removal of Successful washing results also depend on the correct pollen and cat and dog hair already at 40°. dose of detergent: adding too much detergent will not Bed &...
  • Page 13: Troubleshooting

    Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Possible causes / Solutions: Problem: • The appliance is not plugged into the socket fully, or not enough to make contact. The machine does not switch on.
  • Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
  • Page 15: Assistance

    OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
  • Page 16 Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk...

Table of Contents