Brady BMP 41 User Manual page 19

Reporting Function
Several pre-formatted reports are in the database for the user to use. The user
can use the Reporting Function (Top Toolbar) to access the dialog box (shown
below).
To create a report, users follow the four steps outlined in the dialog box.
• Step 1: Select Report – Select a report from the drop-down menu. The
report names are fairly logical and easy to identify. However, a report guideline
will be developed and sent to users in the future.
• Step 2: Select Criteria – Users can utilize the established pre-set queries to
select the outfalls that reports will be created for. Use the Add to Set
function on the right to add the outfalls to the report selection set.
• Step 3: Review Selection Set – Users should review the selection set to
ensure that the outfalls desired for the report are in the selection set.
• Step 4: Run Report – Run the report and print or save as necessary.
Outfall Database
User Guide – IDDE Manual – July 2006
(TOC)
Page 19 of 23