Update The Tv Software - Philips 32PFL7605H User Manual

TV clock
NonPu blish
You can display a clock on the TV screen.
The clock displays the current time using
time data received from your TV service
operator.
Display the TV clock
1. When watching TV, press .
2. Select [Clock], then press OK. The clock
displays on the TV screen.
Note: To disable the clock, repeat the
procedure.
Change the clock mode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. [Country
dependent] applies UTC and gives you the
option of setting [Daylight saving].
1. While watching TV, press
2. Select [Setup] > [Advanced TV settings]
> [Preferences] > [Clock] > [Auto clock
mode] > [Automatic], [Manual] or
[Country dependent], then press OK.
Enable or disable daylight saving
If clock mode is set to [Country
dependent], enable or disable daylight saving
if required for your time zone.
1. In the [Clock] menu, select [Daylight
saving] > [Daylight saving time] or
[Standard time], then press OK. Daylight
saving is enabled or disabled for your time
zone.
TV location
NonPu blish
A range of TV settings are applied to suit the
location of the TV.
Shop or home mode
The flexibility to change settings is limited if
the TV location is set to [Shop] mode. Set
the TV location to [Home] mode to access
all TV settings.
NonPu blish
1. While watching TV, press
2. Select [Setup] > [Advanced TV settings]
> [Preferences] > [Location] > [Home] or
[Shop], then press OK.
EN 34
.
.
Stand mount or wall mount
Specific TV settings are applied to suit the
mounting location of the TV.
1. In the [Preferences] menu, select [TV
placement] > [On a TV stand] or [Wall
mounted], then press OK.

Update the TV software

Check software version
NonPu blish
1. Press .
2. Select [Setup] > [Update software] then
[Advanced software update] > [Current
software info], then press OK.
The version of the current software is
displayed.
From the Internet
If your TV is connected to a router that is
connected to the Internet, you can update
the TV software directly from the Internet.
You need a high speed Internet connection.
Press > [Setup] > [Update now] and
press OK.
Select [Internet] and press OK. Follow the
instructions on screen.
When the update is done, the TV switches
off and back on again automatically. Wait for
the TV to switch back on; do not use the
Power switch on the TV.
If the TV is connected to the Internet, the
TV displays a message about the availability
of new software at start-up.
With USB
NonPu blish
Before performing this procedure be sure to:
• Set aside some time to complete the
entire update.
•
Have available a USB storage device
with at least 256MB of storage space.
• Have access to a computer with a USB
port and internet access.