Reinstall Channels - Philips 32PFL7605H User Manual

3. In the channel list, press .
4. Select [Rename], then press OK.
5. In the entry screen that appears, press the
Navigation buttons or Numeric buttons to
edit the name, then press OK.
6. Once complete, press the Navigation
buttons to select [Done].
• To clear the entry, select [Clear].
To cancel, select [Cancel].
•
7. Press OK to confirm your choice.
8. Press to exit.
Hide or unhide channels
NonPu blish
Hide channels
Hide channels from the channel list, to
prevent unauthorised access.
1. While watching TV, press
2. Select [Channel list], then press OK.
3. In the channel list, select the channel to
hide, then press .
4. Select [Hide channel], then press OK.
The channel is hidden.
Unhide channels
1. While watching TV, press
2. Select [Channel list], then press OK.
3. In the channel list, press .
4. Select [Show hidden channels], then press
OK. Hidden channels appear in the channel
list, but without channel information
displayed.
5. Select the channel to unhide, then press
.
6. Select [Unhide channel], then press OK.
Repeat steps 5 and 6 to unhide other
channels.
Update channel list
NonPu blish
When the TV was switched on for the first
time, a full installation of channels was
performed.
You can set the TV to add or remove digital
channels automatically. You can also
manually start the channel update.
Automatic update
To set the TV to update digital TV channels
automatically, leave the TV in standby mode.
Once a day, the TV updates earlier found
channels and stores new channels. Empty
channels are removed from the channel list.
.
.
If a channel update is performed, a message
appears at startup.
If you do not want this message to appear
1. Press .
2. Select [Setup] > [Advanced channel
settings] or [Advanced satellite settings] >
[Channel installation] > [Channel update
message] > [Off], then press OK.
To disable automatic updates
1. In the [Channel installation] menu, select
[Channel update in standby] > [Off], then
press OK.
Manual update
Update channels yourself at any time using
the manual update.
1. In the [Channel installation] menu, select
[Automatic installation], then press OK.
2. Start the update and select [Update
channels]. The update may take a few
minutes.

Reinstall channels

Automatic reinstall
NonPu blish
When the TV was switched on for the first
time, a full installation of channels was
performed. You can redo this full installation
again to set your language, country and install
all available TV channels.
1. Press .
2. Select [Setup] > [Automatic channel
search] or [Automatic satellite search],
then press OK. [Automatic satellite search]
is only available if the TV supports DVB-S.
3. Follow the on-screen instructions to
complete the channel installation. When
channel installation is complete, [Done] is
selected and a list of installed channels
appears.
4. Press OK.
Notes
• During installation, leave [Settings]
unchanged unless your digital provider
provides you with specific values to
enter.
EN 27