Use Scenea To Display A Picture As Tv Wallpaper; Update The Tv Software - Philips 52PFL8605D/93 User Manual

Adjust volume for visually impaired
1
In the [Universal access] menu, press the
yellow button to select [Mixed volume].
2
Press the Navigation buttons to move
the slider up or down, then press OK.
3
Press to exit.
Audio feedback for visually impaired
This feature enables audio feedback when
buttons are pressed on the remote control
or TV.
1
In the [Univesal access] menu, press the
blue button to select [Key beep].
2
Press the green button to turn on audio
feedback or press the red button to turn
it off.
3
Press to exit.
Use Scenea to display a
picture as TV wallpaper
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to home (see 'Change
TV preferences' on page 24).
Activate Scenea
Single-picture wallpaper
1
Press (Home).
The home menu appears.
»
2
Press the Navigation buttons to select
[Scenea], then press OK.
» The default or pre-loaded picture is
displayed.
Note
•
If the sleep time is off, the wallpaper is
displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleep timer.
Upload a wallpaper picture from a
USB device
Make sure your USB storage device contains a
picture of less than 1MB.
Note
•
The file size of the picture must not be more
than 1MB.
1
Connect the USB storage device to the
TV.
2
Press (Home).
The home menu appears.
»
3
Press the Navigation buttons to select
[Browse USB], then press OK.
» The content browser appears.
4
Press the Navigation buttons to select a
picture.
5
Press (Options).
6
Select [Set as Scenea] and press OK.

Update the TV software

Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1
When watching TV, press
The home menu appears.
»
2
Press the Navigation buttons to select
[Setup], then press OK.
3
Select [Update software] > [Software
update], then press OK.
4
Select [Current software info].
» The version of the current software is
displayed.
(Home).
EN
23