Installation; Connection - Samsung SND-5080 User Manual

installation & connection
3. Drill a hole (diameter: 5mm, depth: min 35mm) at a
desired position while aligning to a hole of the case
bottom and fully insert the provided plastic anchor
(HUD 5) into the hole. Align the hole of the case
bottom to the inserted anchor, and fasten the ASSY
tapping screw (TH M4xL30).

M
When assembling the camera case to a junction box,
select appropriate screw holes on the case bottom for

installation.

4. Connect power and video cables and arrange cable
running not to damage or squeeze them, and as-
semble the camera unit in the reverse way.
5. Adjust the lens aiming to your desired direction.
6. Assemble the Dome Cover.
For waterproof purpose, fix and secure the bolt using L-wrench provided.

For improved EMC performance, it is recommended
to use the insulation cap provided as an accessory.

M
For the wall mounting installation and how to connect the alarm cables, refer to the installation
instructions of SND-5080F. (pages 27~28)
32_ installation & connection
CAMERA FRONT