Table of Contents
Advertisement
Handset and Speaker
When placing/answering calls or using the voice features, you have the option of doing
so off-hook (by lifting the handset) or on-hook (by pressing [
simultaneously activates the built-in microphone).
Abbreviated Dialing
To program/reprogram
AD button
Note: AD buttons must
first be assigned by
System Manager.
To place an AD call
To program/reprogram an
outside number,
extension or feature code
into a personal list
Voice Features
On a separate sheet of paper, jot down the outside
1
numbers, extensions, and/or feature codes you want
to program
Note: Each AD button will hold one complete
telephone number or feature code.
2
Press [
Program
or Dial AD Program code
3
Press [
AD xxxxxx
4
Dial outside number, extension or feature code you
want to store (up to 24 digits)
5
Press [
]
#
Repeat Steps 2-4 to program additional buttons
Hang up or press [
6
1
Press selected [
Call is dialed (silently)
1
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal list(s) (see
example to the left)
Note: Each telephone number or feature code is
stored as a separate item.
Press [
2
Program
or Dial AD Program code
3
Press [
Personal List
or dial Personal List code (1, 2, or 3)
Dial list item (1, 2, 3...)
4
5
Dial number you want to store (up to 24 digits)
6
Press [
]
#
Repeat Steps 3-5 if you want to program
additional items on the same list; press [
and begin again at Step 1 if you want to program
items on another list
Speakerphone
]
] to be programmed
] to end programming
Drop
]
AD xxxxx
]
]
], which
[dial tone]
[dial tone]
[confirmation tone]
[ringback tone]
[dial tone]
[dial tone]
[dial tone]
[confirmation tone]
]
Drop
8
Advertisement
Table of Contents
