Message Alert Tone; Recording Time; Voice Language - VTech FS6220-2 Complete User's Manual

Answering system settings

Message alert tone

When the message alert tone is set to on, and there is at least one
new message, the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the phone is not in use.
1.
2. Press or to scroll to Answering sys, then press SELECT.
3. Press or to scroll to Ans sys setup, then press SELECT.
to scroll to Msg alert tone, then press SELECT.
4. Press or
to choose On or Off, then press SELECT to
5. Press or
confirm your selection. You hear a confirmation tone.
• The answering system must be turned on for the message alert tone to be functional.
• Press any key on the telephone base (except /FIND HANDSET) to temporarily silence
the message alert tone.

Recording time

You can set the recording time limit for each incoming message.
1. Press MENU when the phone is not in use.
to scroll to Answering sys, then press SELECT
2. Press or
to scroll to Ans sys setup, then press SELECT
3. Press or
to scroll to Recording time, then press SELECT
4. Press or
to choose 3 minutes, 2 minutes or 1 minute,
5. Press or
then press SELECT to confirm your selection. You hear a
confirmation tone.

Voice language

You can select the voice language (English or French) to be used
for the voice prompts in your answering system.
1. Press MENU when the phone is not in use.
to scroll to Answering sys, then press SELECT.
2. Press or
to scroll to Ans sys setup, then press SELECT.
3. Press or
to scroll to Voice language, then press SELECT.
4. Press or
to choose English or Français, then press
5. Press or
SELECT to confirm your selection. You hear a confirmation tone.
36
Ans sys setup
Msg alert tone
Off
Ans sys setup
.
Recording time
.
.
3 minutes
Ans sys setup
Voice language
English