Table of Contents
Advertisement
Using the Menu
1
Ensure radio is in IDLE STATE, or in a call.
2
c to enter Menu Mode.
3
+ or e until:
4
c to select
5
+ or e until:
6
c to select
Display shows
current status e.g. :
7
+ or e until:
8
c to select
Display shows:
(for 2 seconds)
9
Radio exits menu
mode and display
shows e.g.:
The scan start alert tone will sound, the display
icon G will be lit and the LED indicator will blink
green during a scan operation. When a call on a
channel is detected the LED will stop blinking
and the channel number will be displayed.
PRIORITY CHANNEL
A scan list may contain a priority channel. This
means that a particular channel (for example, a
commonly used channel) may be checked more
frequently than other channels in the list during a
Utilities
scan operation. Priority channels are
programmed into your radio scan lists by your
dealer, however when a priority channel is
Scan
included in a scan list, the scan icon changes
from G to H.
Off
TALKBACK
If the programmable Talkback option is set, you
On
can respond to any calls received during the
scan operation by pressing the PTT button
before the programmed hang-time ends. Check
Selected
with your dealer for details.
Chan: 05
English
31
Advertisement
Chapters
Table of Contents
