Receiving A Call; Cancelling A Call; Ending A Cal - Motorola GP366R User Manual

If your radio is equipped with a transmit time out
timer (TOT), a warning tone
sound a few seconds before the transmission is
cut off. Your radio may be programmed to inhibit
retransmission within a preset time.

Receiving a Call

1. Turn your radio on and adjust the volume
level.
2. Switch to the desired radio channel.
3. If, at any time, a call is received you will
hear the call at the volume level you have
set.
Note: The system may have a limited call time and
the call may be terminated automatically if
this call time is exceeded.
English 22

Cancelling a Call

will
At any time while setting up a call it may be
cancelled by pressing the Monitor/Call Cancel
button.
The call timer can also cancel a call.
Ending a Call
A call should always be ended by pressing the
Monitor/Call Cancel button.