Expansion cards and backup units
9.3.3
Removing a BBU
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
V
CAUTION!
Do not throw battery backup units into the trash can. Batteries must be
disposed of in accordance with local regulations concerning special
waste.
For further safety information, please refer to section "Environmental
protection" in the PRIMERGY TX120 S3 Server Operating Manual.
9.3.3.1
Required tools
Preliminary and concluding steps: tool-less
●
Removing a BBU: tool-less
●
9.3.3.2
Preliminary steps
Before removing a BBU, perform the following steps:
Ê Locate the defective server as described in section
server" on page
Ê Shut down the defective server as described in section
server" on page
Ê Disconnect the AC power cord from the system.
Ê Remove the server cover as described in section
page
61.
Ê Open the front cage as described in section
page
66.
202
50.
58.
Upgrade and Maintenance Manual
"Locating the defective
"Shutting down the
"Opening the server" on
"Opening the front cage" on
TX120 S3