Table of Contents
Advertisement
When SUA Alerting is enabled,
an Airspace Alert message will
be provided when the aircraft is
approximately 10 minutes or 2
miles (depending on ground
speed) from entering the air-
space boundary. When an
Airspace Alert message is
given, MESSAGE PRESS
MENU will flash at the bottom
of the display as shown in
Figure 1-43.
Pressing the MENU Key will
display the message as shown
in Figure 1-44. Press the OK
Softkey to exit the message.
To enable or disable SUA
Alerting perform the following:
1. Press the MENU Key.
Press the AUX MENU Softkey
to display Figure 1-45.
2. Use the Rotary Knob or
the Joystick to place the cursor
over Navigation Setup as
shown in Figure 1-45.
Rev 2 Apr/2004
Figure 1-43
Figure 1-44
Figure 1-45
1-31
Map Operation
KMD 250 Pilot's Guide
Advertisement
Table of Contents
