Table of Contents
Advertisement
Levelling:
Level the fridge freezer when it is in its final location by adjusting the front feet, until
firm contact is made with the floor. This will stop rocking or vibration and keep the
door aligned which helps the fridge freezer run reliably and efficiently.
Note: Before plugging in and switching on, leave the fridge freezer standing
in its final location for at least 15 minutes to allow it to settle.
Hinge Cover Mouldings:
After the front feet have been adjusted and the fridge freezer is level, fit the left and
right hand hinge cover mouldings supplied.
To fit:
Align the bottom hinge cover moulding
onto the cover plate slots.
Push until the part clicks into place.
Bottle Retainer:
To fit the bottle rack retainer:
Locate the retainer groove at one end of
the bottle rack and then gradually press
down along the top edge until the
retainer is fully in the home position.
4
Installation
Hide quick links:
Advertisement
Table of Contents
