Graco Baby Strollers Owner's Manual page 63

1. Place the infant restraint without base in a rear-facing
position in a vehicle seat.
2. Thread the lap belt or lap portion of a lap/shoulder belt under both
vehicle belt hooks:
Lap Belt
3. Buckle the vehicle belt.
4. Tighten the vehicle seat belt.
To create a secure installation, push
down hard with your free hand on
the infant restraint
tighten the vehicle belt.
5. Check infant restraint is level: Red level
line on the warning label MUST be
level with the ground
6. Test infant restraint for secure
installation as described in infant
restraint "Final Safety Check" page 42.
and pull and
.
27
Lap/Shoulder
Belt