Displays In The Partitioning Master Mode; Armed And Ready Status; Arming And Disarming Multiple Partitions - GE NetworX NX-1192E User Manual

XXII.

DISPLAYS IN THE PARTITIONING MASTER MODE

A.

ARMED and READY STATUS

The LCD screen will display the Armed and Ready status of ALL eight (8) partitions if
any or all of the areas is armed or not ready.
'LVDUP 
$UP
If ALL areas are disarmed and ready to arm, this display will appear on the LCD screen.
B.

ARMING AND DISARMING MULTIPLE PARTITIONS

To arm/disarm multiple partitions, enter a code that has arm/disarm authority for ALL of
the partitions to be armed/disarmed. The following display will appear on the LCD
screen.
'LVDUP 
$UP
LCD DISPLAY FOR AREA
TOP LINE OVER BOTTOM LINE
Blank
Blank
Dash (-)
Dash (-)
Flashing Area #
Dash (-)
Dash (-)
Flashing Area #
Area #
Dash (-)
Dash (-)
Area #
22
This display is reflecting all 8 areas are Ready,
and Area 5 is disarmed. NOTE: If a number is
flashing on the Armed line, that area is armed

Instant. If a number is flashing on the Ready
line, that area is ready to be Force Armed.
The numbers on the top line represent the
disarmed areas to which this code has
access. The numbers on the bottom line

represent the areas that are armed. Refer to
the following table for possible conditions.
Area Not used or Authorized
Area Not Ready
Area Ready to Force Arm
Area Armed Instant
Area Disarmed & Ready to Arm
Area is Armed
CONDITION