Hotpoint 23 Series Owner's Manual And Installation page 7

About CustomCool.
ExpressThaw ™
ExpressChill ™
™
(on some models)
How it Works
The CustomCool ™
feature is a system of
dampers, a fan, a temperature thermistor
and a heater. Depending on the function
selected, a combination of these will be
used to quickly chill items, thaw items or
hold the pan at a specific temperature.
How to Use
Empty the pan. Place the Chill/Thaw tray
in the pan with the metal plate facing
down to chill and store items, or with the
metal plate facing up to thaw items. Place
the items on the tray and close the pan
completely.
Select the ExpressThaw
or SelectTemp ™
and SET light will come on. Tap the pad
until the light appears next to the desired
setting. Use the chart to determine the
best setting to use.
I
To stop a feature before it is finished,
tap that feature's pad until no options
are selected and the display is off.
I
During ExpressThaw
the display on the controls will count
down the time in the cycle.
™ , ExpressChill ™
pad. The display
NOTE: For food safety reasons, it is recommended
that foods be wrapped in plastic wrap when using
ExpressThaw.
and improve thawing performance.
™ and ExpressChill, ™
The pan is tightly sealed to prevent the pan's
temperature from causing temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located at the
top of the refrigerator with the temperature
controls.
I
After the ExpressThaw
complete, the pan will reset to the
MEAT setting (–1°C) to help preserve
thawed items until they are used.
I
The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage
and operating environment.
This will help contain meat juices
™
™
cycle is
7