Hotpoint 23 Series Owner's Manual And Installation page 28

REMOVING AND REPLACING THE DOORS
6 REMOVE THE FREEZER DOOR
Remove the freezer door top hinge cover
A
by either squeezing it and pulling it up or
by prying it off with a plastic putty knife.
Remove the two 5/16" hex head screws,
B
then lift the hinge straight up to free the
hinge pin.
5/16" Hex head
Open the freezer door to 90.°
C
90°
As one person slowly lifts the freezer door
D
up and off the bottom hinge, the second
person should carefully guide the water
line and power line (harness) through the
bottom hinge.
E Set the door on a non-scratching surface
with the inside up.
Installation Instructions
90°
28
7 REMOVE THE REFRIGERATOR
DOOR
A Remove the refrigerator door top hinge
cover by either squeezing it and pulling
it up or by prying it off with a plastic
putty knife.
B Remove the two 5/16" hex head screws,
then lift the hinge straight up to free the
hinge pin.
5/16" Hex head
C
Open the refrigerator door to 90.°
(CONT.)
90°