Tvf Envelope - Roland JUNO-Gi Owner's Manual

Parameter Value
Cutoff V-Sens -64–+63
Resonance
-64–+63
V-Sens
FIX,
F-Env V-Curve
1–7, TONE
1 2 3 4
F-Env V-Sens
-63–+63
F-Env T1 V-Sens -63–+63
F-Env T4 V-Sens
-63–+63
LPF BPF
Level
High
Frequency
Cutoff frequency
Low
Cuto Keyfollow
Cutoff frequency
(Octave)
+2
+1
o
-1
-2
C1 C2 C3 C4
Explanation
Use this parameter when changing the cutoff
frequency to be applied as a result of changes in
playing velocity.
If you want strongly played notes to raise the
cutoff frequency, set this parameter to positive
(+) settings.
This allows keyboard velocity to modify the
amount of Resonance.
If you want strongly played notes to have a
greater Resonance effect, set this parameter to
positive (+) settings.
Curve that determines how keyboard playing
dynamics (velocity) will affect the TVF envelope
Set this to "FIX" if you don't want the TVF
Envelope to be affected by the keyboard
velocity.
1 2 3
5 6 7
Specifies how keyboard playing dynamics will
affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope
to have a greater effect for strongly played notes.
This allows keyboard dynamics to affect the T1 of
the TVF envelope.
If you want T1 to be speeded up for strongly
played notes, set this parameter to a positive
(+) value.
Use this parameter when you want key release
speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly
released notes, set this parameter to a positive
(+) value.
Resonance
HPF PKG
+200
+100
+50
0
-50
-200 -100
Key
C5 C6 C7

4. TVF ENVELOPE

Parameter Value
F-Env Depth -63–+63
F-Env Time KF
-100–+100
(Time Keyfollow)
F-Env Time1 [A]
F-Env Time2
-64–+63
F-Env Time3 [D]
F-Env Time4 [R]
F-Env Level0
4 5 6 7
F-Env Level1
F-Env Level2 -64–+63
F-Env Level3 [S]
F-Env Level4
Time Keyfollow
Time
C1 C2 C3
TVF Envelope
T1
Cutoff
Frequency
L0
L1
Note on
Explanation
Depth of the TVF envelope
Higher settings will cause the TVF envelope to
produce greater change. Negative (-) settings
will invert the shape of the envelope.
Use this setting if you want the TVF envelope
times (T2–T4) to be affected by the keyboard
location.
Based on the TVF envelope times for the C4 key
(center C), positive (+) settings will cause notes
higher than C4 to have increasingly shorter
times.
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the
next cutoff frequency level is reached.
TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change
at each point, relative to the Cutoff Frequency
value.
-100
-50
0
+50
+100
C4 C5 C6 C7
T2 T3 T4
L2 L3
Note off
Key
Time
L4
41