About The Display; Adjusting The Display Contrast ([Lcd Contrast] Knob); Turning The Display Backlight On/Off - Roland JUNO-Gi Owner's Manual

About the Display

Adjusting the Display Contrast
([LCD CONTRAST] Knob)
The characters in the display may be difficult to read immediately after
the power is turned on, or after you have been using the JUNO-Gi for
an extended time, or due to the conditions in which it's being used.
If this occurs, turn the rear panel [LCD CONTRAST] knob to make the
display legible.
Screens shown in this manual
Various screens are shown in this manual for explanatory purposes, but please be aware that the screen shots in
this manual may not necessarily match the factory settings (e.g., the names of sounds).

Turning the Display Backlight On/Off

To reduce battery consumption, you can turn off the display backlight
when it's not required.
1. Hold down the [SHIFT] button and press the [EXIT] button.
The display backlight will turn off.
Turning the display backlight on
1. Hold down the [SHIFT] button and press the [ENTER] button.
The display backlight will turn on.
MEMO
The System setting "Power Save Mode" (p. 80) lets you choose to turn
off the backlight when no operation has been performed for a
certain length of time. (With the factory settings, the backlight will
dim after five minutes.)
17