Infinite Heat Controls - Hotpoint RF725GP Use And Care Manual

See Surface Cooking Guide.
Surface Cooking with

Infinite Heat Controls

At both OFF and HI positions,
there is a slight niche so control
"clicks" at those positions; "click"
on HI marks the highest setting;
the lowest setting is LO. In a quiet
kitchen, you may hear slight
"clicking" sounds during cooking,
indicating heat settings selected are
being maintained.
Switching heats to higher settings
than switching to lower settings.
8
How to Set the Controls
I
-
Step 1: Grasp control knob and
push in.
Step 2: Turn either clockwise or
counterclockwise to desired heat
setting.
Control must be pushed in to set
only from OFF position. When
control is in any position other
than OFF, it maybe rotated
without pushing in.
Be sure you turn control knob to
OFF when you finish cooking. An
indicator light will glow when ANY
heat on any surface unit is on.
Cooking Guide for
Using Heat Settings
HI—Quick start for cooking; bring
water to boil.
MEDIUM HI—Fast fry, pan broil;
maintain fast boil on large amount
of food.
slow boil on large amount of food.
MEDIUM LO—Steam rice,
cereal; maintain serving
temperature of most foods.
LO—Cook after starting at HI;
cook with little water in covered
pan.
NOTE:
1. At HI and MEDIUM HI
settings, never leave food
unattended. Boilovers cause
smoking; greasy spillovers may
catch fire.
2. At MEDIUM LO and LO
settings, melt chocolate and butter
on small surface unit.