Features - Jenn-Air WINE CHILLER Owner's Manual

Features

• Adjustable Temperature Control: The temperature
control is adjustable from the low forties to the mid
sixties. The temperature range allows flexibility for
storage temperature preferences and accommodates
storage of a variety of red, white and sparkling wines.
• Interior Light: The light control knob is located on
the lower right front of the wine chiller, in the toe
kick area.
The light automatically illuminates to full intensity any
time the door is opened, to make it easier to view the
wine labels.
To view the display of your wine collection, while the
door is closed, turn the light control knob (see page
12).
NOTE: When the knob is turned fully counter-
clockwise, the light is off when the door is closed.
In the full clockwise position, the light remains on
continuously. The knob can be set at any position in
between to achieve the desired level of light intensity.
The dimming feature only affects the light when the
door is closed. The light is always at full intensity
when the door is open.
Remember to turn off the light when it is no longer
needed.
• Pull-out Racks: The middle four racks may be
pulled out approximately 6" (15 cm) to facilitate
adding or removing bottles
•
Do not attempt to remove a rack while it has wine
bottles stored. Always empty the rack prior to
removing it from the cabinet.
13
CAUTION
• Single Bottle Racks: Because bottles are not
stacked on top of each other, you can easily view
and access your inventory without disturbing other
bottles.
• Lock: To secure your wine collection, the wine
chiller can be locked. Use the ejectable key that has
been shipped with your appliance to securely lock
the door.
NOTE: Lock is designed so key cannot stay inserted
into the lock.
• Wood Rack Fronts: There are four unfinished solid
maple rack fronts packed with your wine chiller.
These can be finished to match the surrounding
cabinetry in your home. Follow the finishing
instructions provided by the stain manufacturer.
NOTE: In many cases stains and/or finishes have
odors that may be objectionable in an enclosed area.
To Install: Place one rack front on each of the
middle four racks. Align the holes in the wood up to
rack front and gently tighten down.