Motor Base; Control Panel - Vita-Mix Touch and GO Owner's Manual

CARE NOTE: Do not let mixtures, liquids and food products dry within
the container. Rinse throughout use. Drying product may lock around the
blade and weaken/tear the bearings seal when restarted. Do not place
containers in the freezer. Extremely low temperature combined with hot
ingredients and/or the immediate rapid action of the blade may crack
the container.

Motor Base

1. Unplug the power cord.
2. Wash outside surface with a damp soft cloth or sponge, which has been
rinsed in a mild solution of liquid dish soap (Ivory Liquid
in warm water. NEVER IMMERSE MOTOR BASE IN WATER OR
OTHER LIQUID.
3. Polish with a soft cloth.

Control Panel

Gently wash the front panel with a soft cloth and a low pH balance soap,
being careful not to scratch the Display Window.
NOTE: Be sure to wring excess water out of cloth or sponge when cleaning
around the controls, drive socket or any electrical part.
Lid
Separate the lid and plug, then wash in warm soapy water. Rinse clean
under running water and dry. Reassemble before use. (See pages 8 & 9).
Cover Door
The cover can be removed (See page 9) and cleaned by placing under
running water and washed with a soft cloth. Wipe dry and replace back
on the base.
® or equivalent)
CONTINUED ON PAGE 22
21