Removing Monitor Base - Fujitsu Siemens Computers SCENICVIEW A17-2 Operating Manual

Removing monitor base

Before you can use a swivel arm or a wall bracket, you must remove the entire monitor base:
► Switch off the monitor and pull the power plug out of the power socket.
!
The display surface is susceptible to scratching!
1
Note on mounting a swivel arm or a wall bracket
For instructions on how to mount the swivel arm or wall bracket, please see the documentation for
the swivel arm or wall bracket.
We recommend always operating the monitor in the standard position (4:3, wide format, landscape
mode).
A26361-K1063-Z121-1-7619, edition 1
► Lay the monitor on its face on a soft
surface.
► Remove all cables.
► Unscrew the screws (1, 2) and remove the
cover.
► Unscrew the screws (1, 2) and remove the
monitor base.
You can now mount a swivel arm or a wall
bracket as per VESA FPMPMI with 100 mm hole
spacing with four screws.
2
9