Removing The Monitor Base - Fujitsu Siemens Computers B15-1 Operating Manual

Removing the monitor base

Before you can use a swivel arm or a wall bracket, you must remove the monitor base:
!
The monitor surface is susceptible to scratching!
Ê
Switch off the monitor and pull the power plug out of the power socket.
Ê
Lay the monitor on its face on a soft surface.
Ê
Remove the cover and disconnect all cables.
Ê Remove the screw on the rear of the monitor.
You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 75 mm hole spacing.
For instructions on how to mount the swivel arm or wall bracket, please see the documentation for
the swivel arm or wall bracket.
A26361-K905-Z100-2-5E19
Colour monitor B15-1
English - 17