Removing The Monitor Base; Technical Data - Fujitsu Siemens Computers 463V FA Operating Manual

Colour monitor 463V FA

Removing the monitor base

Before you can use a swivel arm or a wall bracket, you must remove the monitor base:
!
The monitor surface is susceptible to scratching!
Ê
Switch off the monitor and pull the power plug out of the power socket.
Ê
Lay the monitor on its face on a soft surface.
Ê
Remove the cover and disconnect all cables.
Ê
Remove the four screws on the rear of the monitor.
You can now mount a swivel arm or a wall bracket as per VESA FPMPMI with 100 mm hole
spacing.
For instructions on how to mount the swivel arm or wall bracket, please see the documentation for
the swivel arm or wall bracket.

Technical data

Dimensions and weight (LCD monitor)
Visible diagonals:
Dot pitch:
Screen size:
Maximal resolution:
Dimensions (W x H x D) incl.
monitor base:
Dimensions cardboard box (W x H x
D):
Weight:
18 - English
46 cm
0.28 mm
359 mm x 287 mm
1280 x 1024 pixels
416.3 mm x 425 mm x 203.7 mm
540 mm x 531 mm x 280 mm
7.3 kg
A26361-K864-Z100-1-5E19