Faqs And Troubleshooting - Jabra GO 6430 User Manual

10. faQS and tRouBleShootinG

Q WHY WON'T MY HEADSET PAIR WITH MY MOBILE PHONE?
a please check the following:
- make sure that the headset is charged and in pairing mode. If the headset is already turned on, use the
multi-function button to turn it off (press and hold down for 4 seconds), then turn it back on in pairing
mode (press and hold for 4 seconds). In pairing mode, its led should be a constant blue color. If it's red,
that means the headset needs charging.
- make sure that Bluetooth® is active on your mobile phone and put it into Bluetooth® pairing mode. the
exact procedure for doing this varies according to brand and model. see your user manual for details.
- remember that the headset identifies itself as "Jabra GO 6400" — you need to find and select this on your
phone. you might also be prompted to enter the pass code "0000" (four zeros) to accept pairing.
If you are still having trouble, see the section called "pairing the headset with your mobile phone" in the user
manual for more information.
Q WHY WON'T MY HEADSET PAIR WITH THE USB Bluetooth® ADAPTER?
a please check the following:
- make sure that the headset is charged and in pairing mode – see above.
- make sure that the adapter is in pairing mode. With the adapter attached to the pC, press and hold the multi-
function button down for 2 seconds to put it in pairing mode. If in pairing mode, its led is a constant blue color.
If you are still having trouble, see the section called "pairing the adapter and headset" in the user manual for
more information.
Q WHY DOESN'T MY COMPUTER DETECT THE USB Bluetooth® ADAPTER?
a try connecting your UsB Bluetooth® adapter to another UsB port on the pC. also, please note that it must be
a direct connection - i.e. with no UsB hub in between.
Q WHY DOESN'T MY HEADSET WORK WITH MY SOFTPHONE / MOBILE PHONE?
a please check the following:
- make sure the headset is charged. the led is a constant green when fully charged.
- make sure you are within range of the UsB Bluetooth® adapter or mobile phone. see the question on range,
below.
- the adapter/mobile phone and the headset may no longer be paired. see the questions on pairing these
devices, above.
Q I CANNOT HEAR ANYTHING IN MY HEADSET WHEN USING MY MOBILE PHONE.
a try the following:
- make sure the two devices have been paired and are in range.
- Increase the speaker volume on the headset by sliding your finger along the touch-sensitive panel on the
side of the headset.
Q MY HEADBAND / EARHOOK / NECKBAND IS BROKEN. HOW DO I GET ANOTHER ONE?
a simply contact your local Jabra supplier and place an order. you can find the part numbers in the section called
"Optional accessories" in the user manual.
Q I HEAR A LOW NOISE IN THE HEADSET WHEN THERE IS SILENCE AT THE OTHER END?
a your headset is probably using one of the highest volume settings. decrease the speaker volume on the
headset by sliding your finger down the touch-sensitive panel on the side of the headset.
Q I CAN'T HEAR SOUND OR LISTEN TO MUSIC FROM MY PC IN MY HEADSET.
a please check the following:
- make sure that the UsB Bluetooth® adapter is selected as the current audio device both in the Windows
sound control panel and in the application you are using.
- make sure the audio link to the pC is open (e.g. by right-clicking on the Jabra device service icon in the
Windows notification area on your pC).
- make sure softphone is enabled in Jabra pC suite.
Jabra GO 6430 User manUal
36