Travel Charger; Product Disposal; Certifications And Safety Approvals - Jabra GO 6430 User Manual

Visual indicators:
multicolor leds indicate pairing status, connection status, on-call status and other details
PC-based configuration:
all settings can be stored and loaded from a pC for backup and mass deployment
Softphone support:
full call handling for skype, Cisco Ip Communicator, microsoft Office Communicator; others see headset as a
standard sound card; support for additional softphones may be added via driver updates for the pC

12.6 tRavel chaRGeR

Dimensions:
34mm x 83.5mm x 26.5mm
Storage compartments:
holds both Jabra GO headset and Jabra lInK 350 UsB Bluetooth® adapter
Capacity:
5v / 500 ma
Power and data port:
mini UsB
Connectivity:
- mains power socket, using supplied mains power adapter
- pC UsB port, using supplied mini UsB-to-UsB cable
- Car cigarette-lighter socket, using car charge adapter (optional accessory)

12.7 PRoduct diSPoSal

please dispose of the headset according to local regulations and recycle when possible. do not dispose as household
waste. do not dispose of the headset in a fire as the battery may explode. Batteries may also explode if damaged.

12.8 ceRtificationS and Safety aPPRovalS

CE
this product is Ce marked according to the provisions of the r & tte directive (99/5/eC). hereby, Gn declares
that this product is in compliance with the essential requirements and other relevant provisions of directive
1999/5/eC. for further information, please consult http://www.jabra.com.
Within the eU, this device is intended for use in austria, Belgium, Cyprus, Czech republic, denmark, estonia, finland,
france, Germany, Greece, hungary, Ireland, Italy, latvia, lithuania, luxembourg, malta, poland, portugal, slovakia,
slovenia, spain, sweden, the netherlands, United Kingdom, and within efta in Iceland, norway and switzerland.
FCC
this device complies with part 15 of the fCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Users are not permitted to make changes or modify the device in any way. Changes or modifications not
expressly approved by Jabra will void the user's authority to operate the equipment.
this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the fCC rules. these limits are designed to provide reasonable protection against harmful interference
in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
however, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help.
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
the term "IC:" before the certification/registration number only signifies that registration was performed based
on a declaration of Conformity indicating that Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment.
Patents and design registration pending international
Jabra GO 6430 User manUal
41