Basic - Digimerge DHU500 SERIES Installation Manual

System Set
System Set

Basic

Settings for General Parameters.
Basic
1. LANGUAGE: Displays the current default language on the DVR (English or Dutch).
2. INITIALIZATION: Resets all settings to Factory Default. To change the setting, press the
buttons to highlight, and press the SEL button. A message will appear prompting for User input:
All setup will be returned to Factory Default
• Press the Select key to continue
• Press the Menu key to exit
3. DATE FORMAT: Configuration for the date display on the DVR. Press the
highlight, and press the
• MM-DD-YYYY
• DD-MM-YYYY
• YYYY-MM-DD
4. DATE/TIME/DST SET: Sets the Date and Time for the unit. Press the
highlight, and press the SEL key to enter the configuration. Press the
the date format. Daylight Savings can be set from this menu to run between set days.
5. INFORMATION: Displays System Information:
6. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
34
Language English
Initialization
Date Format
MM-DD-YYYY
Date/Time/DST Set
Information
Save & Exit
to change the date format:
INSTALLERS MANUAL |
DATE/TIME
20:21:28
DST: OFF
START: MAR 2 SUN 02:00
END: NOV 1 SUN 02:00
OFFSET: 01:00
and
buttons to change
HDD Capacity: ## GB / ## GB
FPGA Version:
############
Application: ############
RAMDisk Version:
############
Kernel Version:
############
IP Address: ###.###.###.###
MAC Address
##:##:##:##:##:##
©
Copyright 2006 Digimerge Technologies Inc.
SECTION 4
01-01-2006
and
and buttons to
buttons to
and buttons