Led Information - Cradlepoint MBR1400 Setup Manual

LED Information

SIGNAL STRENGTH BUTTON Blue LED bars indicate the active modem's signal strength. Press button to
turn on/off. 4 Solid Bars = strongest signal 1 Blinking Bar = weakest signal
POWER The MBR1400 must be powered using an approved 12V DC power source.
Green = Powered On. No Light = Not receiving power. Check that the unit is connected to an outlet.
Amber = Attention. Check router status page.
NETWORK LAN CONNECTION Indicates a connected device on the 1-4 LAN ports on the MBR1400.
Green = Connected to an active 10/100 Ethernet interface. Blinking Green = traffic. Blue = Connected to an
active 10/100/1000 Ethernet interface. Blinking Blue = traffic. No Light = not connected, the connection is not
configured correctly, router is not configured correctly, or may not be turned on.
WPS WiFi Protected Setup. When you press the WPS button for five seconds, it allows you to use WPS
for your WiFi security. Blinking Blue = WPS setting is in progress. Solid Blue = WPS is active.
CradlePoint recommends using WPA2 WiFi Security.
WAN CONNECTION Indicates information about a data source connected to the WAN port (blue Ethernet port.
Green = Connected to an active 10/100 Ethernet interface. Blinking Green = traffic. Blue = Connected to an
active 10/100/1000 Ethernet interface. Blinking Blue = traffic. No Light = not connected, the connection is not
configured correctly, or switch or router are not configured correctly or turned on.
LED Information
10
WiFi BROADCAST Indicates activity on the WiFi broadcast for either the 2.4GHz and 5GHz bands.
Green = 2.4 GHz WiFi is on and operating normally.
EC
Blue = 5GHz WiFi is on and operating normally.
Blinking Red = Error with 2.4GHz or 5GHz connection.
No Light = WiFi is off.
USB MODEMS Indicates the status of any USB modems connected to the MBR1400.
EC
(A connected CradlePoint Business Grade Modem LED information will be shown on LED #2.)
Green = Modem has established an active connection. Blinking Green = Modem is connecting.
Amber = Modem is not active. Blinking Amber = Data connection error. No modem connection possible.
Blinking Red = Modem is in the process of resetting.
EXPRESS CARD MODEMS Indicates the status of any ExpressCard modems connected to the MBR1400.
EC
Green = Modem has established an active connection. Blinking Green = Modem is connecting.
Amber = Modem is not active. Blinking Amber = Data connection error. No modem connection possible.
Blinking Red = Modem is in the process of resetting.
11